 |
||||||||||
 |
As its name suggests, the XR501 accommodates a wider range than that of other couplings. With a range of IPS through Class 200 A/C pipe sizes, the XR 501 is the quick and easy solution for coupling pipe. Installation of the XR501 is done without disassembly of the coupling. It is installed as one piece over the joint. |
|||||||||
|
|
||||||||||
 |
||||||||||
 |
||||||||||
| MATERIALS: Castings: The end rings and center rings are cast from ductile (nodular) iron meeting or exceeding ASTM A 536-80, Grade 65-45-12. Gaskets: 80 Durometer gaskets are made from virgin Styrene Butadiene Rubber (SBR) compounded for water and sewer service in accordance with ASTM D2000 MBA 710-90. Other compounds available for petroleum, chemical, or high temperature service. Bolts and Nuts: 5/8 inch, High strength low alloy steel trackhead bolts. National coarse rolled thread and heavy hex nuts. Steel meets AWWA C111-95 composition specifications. Stainless steel bolts and nuts available on request. Coatings: Shop coat applied to cast parts for corrosion protection in transit. Fusion bonded epoxy, liquid epoxy and other coatings available on request. Pressure: When properly installed on a pipe that is within the correct outside diameter range, couplings in the Romac XR 501 line can be used at working pressures up to 250 psi. |
||||||||||
|
||||||||||
 |
Romac Products are manufactured in the USA | |||||||||
|
|
||||||||||
| Call 425 951 6200 for more information.
2006 Romac Industries, Inc. |
||||||||||